Completing the Building Envelope
If you would like to leave us a comment please go to
Aluminium extrusion for Silver Electrophoresis
Technology: Aluminum Extrusion
Normal Anodizing thickness: 8-12 micro
Normal Power Coating thickness: 60-100 micro
Material: Aluminium Alloy 6063, 6063A, 6060, 6061,6005
Temper available: T4, T5, T6, etc.
1, electrophoretic coating can be fully mechanized, automated, not only reduce the labor intensity, but also greatly improve the labor productivity, suitable for a large number of pipeline operations.
2, electrophoretic coating high rate of lysis in the water completely dissolved or emulsified, prepared into the bath viscosity is very low, it is easy to penetrate into the bag-like structure and the gap, especially for the special-shaped conductive material surface coating Installed.
3, the electrophoresis bath has a high conductivity, the coating ions in the electric field under the action of rapid swimming, in the coated surface is neutralized after the formation of electrical neutral wet paint film, with the wet film thickening resistance increased large, the amount of paint particles deposited gradually become smaller, thus forming a uniform and delicate coating film.
4, the use of high paint, up to 95% or even 100%. Due to the low solid content of the bath, the viscosity is small, the coating is brought out less paint, especially the application of ultrafiltration technology, the implementation of the coating process closed cycle, the paint recovery rate is high.
5, the coating of anti-corrosion ability, electrophoretic coating due to the role of the film in the electric field evenly, so the use of electrophoretic coating method can make the workpiece cavity, weld, edge corrosion resistance significantly improved.
6, electrophoretic coating solution is low, one is conducive to environmental protection, the other is the production of good security.