Aluminium extrusion pipes are a versatile and durable option for various applications in your home, including plumbing, electrical conduit, and structural framing. Proper installation is essential to ensure the performance and longevity of these pipes. Here’s a comprehensive guide on how to properly install aluminium extrusion pipes in your home:
Materials and Tools
Before starting, gather the necessary materials and tools:
– Aluminium extrusion pipes
– Pipe cutter
– Deburring tool
– Pipe glue
– Primer
– Joining sleeves or fittings
– Measuring tape
– Level
– Safety glasses
– Gloves
Preparation
1. Measure and Cut Pipes: Measure the required pipe lengths and mark them using a measuring tape and a pencil. Use a pipe cutter to cut the pipes cleanly.
2. Deburr Pipes: Remove any burrs or sharp edges from the cut pipe ends using a deburring tool. This step ensures a smooth and leak-free connection.
Joining and Mounting
1. Applying Primer: Apply a thin layer of primer to the inside and outside of the pipe ends and the joining sleeve or fitting. The primer helps improve the adhesion of the pipe glue.
2. Applying Glue: Apply a bead of pipe glue to the inside of the joining sleeve or fitting and the outside of the pipe ends.
3. Inserting Pipe: Push the pipe into the joining sleeve or fitting until it reaches the stop.
4. Mounting Pipes: Mount the pipes securely using clamps or pipe supports. Ensure that the pipes are level and properly aligned.
Additional Considerations
1. Types of Joining Sleeves: There are different types of joining sleeves available, such as compression, expansion, and slip-on. Select the type that is appropriate for the application and pipe size.
2. Pipe Fittings: For complex installations, use pipe fittings such as elbows, tees, and adapters to connect pipes at different angles or directions.
3. Testing and Inspection: Once the pipes are installed, perform a pressure test to ensure they are leak-free. Also, visually inspect the joints and connections for proper alignment and tightness.
Tips for Safety
– Always wear safety glasses and gloves when handling aluminium extrusion pipes and tools.
– Avoid working with sharp edges or burrs.
– Use a well-ventilated area when working with pipe glue.
– Allow ample time for the pipe glue to dry before pressurizing the pipes.
